- Wear protective gear – Whether your shed-building project is big or small, it is important to make sure that you always wear proper protective gear at all times. This will ensure that you do not injure yourself while you are working. You should make sure that you always wear safety glasses, hard hat, protective clothing, and leather gloves when you are building your garden shed.
- Handle materials properly – It is important that you take proper care when you are handling materials to avoid injuring yourself and others who may be working around you. You can lower the chances of getting slivers or cuts in your hands or fingers by wearing suitable leather work gloves. You can also prevent bruises and cuts to your arms and legs by wearing protective clothing. When you need to move heavy sheeting or lumber, be sure to ask for help so that you avoid injuring your back.
- Clear the working area – It is important to keep your work area as clear as possible so that you do not stumble and fall or trip on something and hurt yourself. You should make it a point to organize your sheeting, lumber, and other supplies in neat piles. This will ensure that you can easily and safely pick up what you need without the material falling all over the place and avoid injuring yourself.
- Use hand tools with caution – Hand tools, especially those for sawing and nailing, can be dangerous when they are not used properly. It is important that you always handle them with caution. When you are sawing materials, make sure that they have proper support and keep your fingers away from the cutting edge. Always use a proper hammer, usually a claw hammer, when you have nailing jobs. Also, be sure to be careful when holding a nail. You could hit the wrong nail and end up with an excruciating black thumb nail. You can prevent these kinds of injuries with a little care and practice. There are tools that may be easier to hold without gloves for a better grip, so you will need to take extra precautions to avoid getting injured.
- Follow safety rules when using power tools – When you are using power tools, always make sure that you follow safety rules and the manufacturer’s instructions. Also, make sure that your full attention is on the job at hand. As mentioned earlier, make sure that sheeting and lumber are well supported and hold them in a solid position before you turn on your power tool. Make sure that you are always aware of what could happen if chips fly or the piece of wood slips, or if your fingers get too close to the cutting line. Remember that you need to be in control at all times and keep your focus on the task to avoid sloppy work and possibly injuring yourself. You can also damage a power tool if you are not careful of course that is better than hurting yourself.
0 comments