Before Your Shed/Playhouse Arrives
Western Red Cedar will actually start to weather to a silvery-grey even 3-4 weeks after being exposed to the sun. If you want to keep your product looking “new” and you can’t assemble your unit for some time after it arrives, make sure you cover the unit and protect it from the elements until you can get at it. If you have enough garage space available, that could be an ideal location – sheltered from the sun and also dry and safe. Consider clearing out additional garage space to store if possible.After Your Shed/Playhouse Arrives
When your OLT product arrives, it will either be unloaded with a power tailgate to the ground on a contained pallet or off-loaded piece-by-piece by you and some helpers. If power tailgated down and you can’t get at it immediately, request the driver pallet jack the entire unit in that great space you made in the garage. Shipping companies sometimes can’t accommodate you but always ask! If the unit is left on your driveway, try to pick a spot not always in direct sunlight if possible. Either way, remove the protective plastic cover from the unit and cut the plastic banding holding the entire unit together. This will let the unit breathe to reduce moisture from the wood which will be great when you stain later. Consider removing various pieces from the package so they can start to dry and slowly reach the moisture equilibrium in your area. If your unit is hand offloaded from the delivery truck, sort pieces according to assembly section such as floor, walls, roof and trim. This will make it easier to locate pieces later and also get a game plan for what can be stained before and after assembly. If pieces are left outside, be sure to cover if exposed to direct sunlight or moisture for any period of time.Stain Choice
Walk into any home do-it-yourself paint and supply store and you’re bound to be inundated with finish-stains. These products provide protection and also dress up the wood’s surface, enhancing cedar’s natural colors and textures or changing its face altogether. Three common choices are solid-colour stains, semi-transparent stains, and transparent stains. Solid-colour stains act as a barrier between the elements and the wood, forming a film around the wood. Semi-transparent stains are ideal when you want to maintain western red cedar’s natural finish without weathering. Semi-transparent stains penetrate the wood’s pores, to varying degrees based on product. Transparent stains enhance the wood’s colour and act as an invisible protectant. We here at Outdoor Living Today.com have experimented with many name brands, and in our opinion, a couple have stood out: Cabot Stain and Sikken’s.- Cabot’s Wood Toned Deck and Siding Stain in Cedar or Natural, and
- Sikken’s Cetol SRD (Siding, Deck and Rails) in Cedar or Natural.
0 comments